Link
docs
Search

druid

To communicate with crow we’ll use druid, a command-line tool that lets you send & receive text, as well as run & upload scripts.

preparation

First we’ll collect & install a few tools, starting with Python which is the environment that runs druid. Don’t worry, you don’t ever have to type any Python code into druid.

druid requires Python 3.5+, but let’s get the most recent version (3.8 as of this writing, November 2019):

  • macOS: download from the Python website
  • Windows: search Python 3.8 in the Microsoft Store (it’s free)
    • the Microsoft Store is the most straightforward way to install Python on Windows, but if you choose to install from the Python website directly then please follow these instructions
  • Linux: in a terminal run sudo apt-get install python3 python3-pip or equivalent

Now load up a terminal so we can check Python is installed and get the next pieces:

  • macOS: Open terminal
  • Windows: Use PowerShell and open by right-clicking and Run as administrator
  • Linux: Your choice! gnome-terminal is likely your default

Check if Python is installed and working:

python3 -V

Which should print Python 3.8 or something similar. If this doesn’t work for you, try removing the 3 and just run python -V.

No luck? Post to the lines thread & we’ll figure it out (and update this doc).

Now it’s time to install druid!

install druid

install druid on macOS + Linux

In a terminal, execute:

pip3 install monome-druid

NB: If you see an error like “ERROR: Could not install packages due to an EnvironmentError…”, try running the command with sudo to gain the required privileges:

# you'll be asked to enter your password after typing this:
sudo pip3 install monome-druid

Now druid should be ready to use, you might need to close and reopen the terminal to get access to it.

To update when there’s a new release, use

pip3 install --upgrade monome-druid

NB: If you see an error like “The script druid is installed in ‘/Users/your/Library/Python/3.8/bin’ which is not on PATH…”, you can open up ~/.zshrc and add this line: export PATH="$PATH:/$HOME/Library/Python/3.8/bin". Note macOS switched from bash to zsh with 10.15 (Catalina.) If you on on a previous version of macOS, you will probably have to add this line to your ~/.bash_rc instead.

install druid on Windows

In PowerShell, execute:

python -m pip install pyserial asyncio prompt_toolkit

Then:

python -m pip install --upgrade setuptools

Finally:

python -m pip install monome-druid

To update when there’s a new release, use

python -m pip install --upgrade monome-druid

Windows errors

After the installation is complete, you may see a message like this one:

WARNING: The script druid.exe is installed in ‘C:\Users\USERNAME\AppData\Local\Packages\PythonSoftwareFoundation.Python.3.8_qbz5n2kfra8p0\LocalCache\local-packages\Python38\Scripts’ which is not on PATH.

If you do, copy the entire path listed (the stuff between the 's), open your Start menu, search “path” and select “Edit the system environment variables”.

On the dialogue that appears, click the Environment Variables button. In the “User variables for USERNAME” dialogue box, select Path and click Edit. On the next dialogue, click the New button, and paste in the path you copied earlier.

Click OK until all the dialogue boxes are gone.

On Windows 7, druid may be unable to connect with crow. Try using Zadig (instructions here) to install the “USB Serial (CDC)” driver instead of the “WinUSB” driver.

loading druid

Let’s load up druid to test if everything works as expected. With crow connected to your device with USB and your modular case turned on, execute:

druid

You should see druid open with the following message up top:

//// druid. q to quit. h for help

<crow connected>

If you see <crow disconnected> instead, make sure your modular case with crow is turned on, and the USB cable is connected.

If druid responds with can't open serial port you probably don’t have the required permissions to open the device.

Permissions

If druid says can't open serial port you probably don’t have the required permissions to open the device. To remedy this add yourself to the correct group, which can be determined by running (on Linux):

ls -l /dev/ttyACM0
crw-rw---- 1 root dialout 166, 0 Oct  9 20:28 /dev/ttyACM0
#                  ^ the group

In this case the group is called dialout but it’s sometimes also called uucp.

To add yourself to the dialout group run

sudo gpasswd -a <your username> <the group name found above>

After this logout and login again or simply restart.